M R Enterprises

The DTX-1500 CableAnalyzer gives you a complete solution that streamlines every aspect of the certification job – from setup, to testing and troubleshooting, to reporting results to the customer. The DTX-1500 performs Class E/Cat 6 certification tests in just 9 seconds and Class EA/Cat 6A in 22 seconds – in full compliance with industry standards and with superior accuracy. This incredible speed means you can test hundreds of links in an eight-hour shift. Troubleshoots faults fast When a link fails, the DTX-1500 provides quick, easy-to-understand directions to identify the point of failure (distance from the tester) and the possible reasons for the failure. These directions not only tell you the problem, but also identify corrective actions your test technicians can take to solve the problem quickly – all without having to consult the project manager. Instead of spending time executing trial and error corrections – and re-testing to find out whether the problem has been resolved – the technician knows exactly where to look and what to do to fix the failing link. Even if only two percent of the cables certified in one shift fail Autotest, you’ll save as much as two hours of labor time per day certifying. Fast even when you’re not testing The DTX-1500 isn’t just a fast way to test. Its ease-of-use lowers training time. Extended battery life means you can do more on a single charge. And a bright color display, ample memory, and built-in talk feature all contribute to overall productivity while enhancing the user experience. This all adds up to save you time and money every day.

Advanced sensing modes accurately find the correct cable bundle and then rapidly isolate the exact cable from within that bundle. Two audible controlled songs and LED signal strength indicators simplify cable location, even in noisy environments. Digital signal rejects noise and safely tones active networks. Cablemap checks end-to-end cable continuity and basic miswires. Identifies and troubleshoots services with datacom link, two-line telecom, continuity, and polarity. Powerful talk battery capability tests telecom circuits. Digital signal locating technology that´s guaranteed to find cables others can´t! Only IntelliTone™ Toners and Probes bring the performance breakthrough of digital signal technology to common problems that you face installing, maintaining, changing and troubleshooting networks. IntelliTone™ locates and isolates even the most elusive, hidden or bundled voice, data and video cables quickly and reliably, even on active networks with an improved wire map startup process. Dramatic gains in speed, precision, and productivity have made analog tools obsolete. The antenna is now on the tip rather than just below the tip. This assists with noise immunity as the user can get the antenna (tip) closer to the signal. IntelliTone™ kit includes IntelliToner™, 200 Toner, and 200 Probe, coax F connector (2) patch cables, test leads with alligator clips, lanyards, owners CD and quick start guide and 9V batteries (2).

Key Features:

• Locates cables safely and effectively on active networks
• Kit includes IntelliTone™ toner, probe, adapters, patch cables, and test leads
• Verifies twisted pair installation with end to end continuity test
• IntelliTone™ digital toning eliminates noise and false signals
• SmartTone analog toning isolates individual wire pairs

We are engaged in offering 750ml PU Foam  to our clients. Our range of all products is widely appreciated by our clients.

Next-generation MicroScanner verifies voice/data/video cable and services with a revolutionary user interface. Revolutionary Interface – graphical wire map, length, cable ID, and distance to fault displayed on one screen Multimedia Support – tests all common media types including RJ11, RJ45, Coax, with no need for adapters IntelliTone Toning – trace virtually any cable or wire pair with IntelliTone digital and analog toning VDV Service Detection – verifies today’s media services, including 10/100/1000 Ethernet, POTS, and PoE Rugged Housing – integrated rubber holster enhances grip and makes it durable enough for the toughest jobs.  backlit LCD makes results crystal clear whether in bright sunshine or in a dark closet.

Key Features:

• Wire map, length, cable ID, distance to fault on one screen
• Tests common media types (RJ11, RJ45, coax) without adapters
• VDV Service Detection verifies 10/100/1000 Ethernet, POTS, and PoE
• Locate and trace cable or wire pairs with IntelliTone™ Pro 200

Copper qualification tester troubleshoots and qualifies Ethernet network cabling speed (10/100/1000/VoIP). Works on live networks to provide Ethernet switch detection and device configuration Measure network capacity (10 Meg, 100 Meg, 1 Gig) to determine support for VoIP, data and video Advanced troubleshooting diagnostics; insertion loss, cross talk, noise issues Core troubleshooting features; length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet (POE) detection Tests all copper cabling media: twisted-pair, coax, and audio Locate and trace cables with digital toning technology. Requires IntelliTone 200 Digital Probe (included with CIQ-KIT)

Copper qualification tester troubleshoots and qualifies Ethernet network cabling speed (10/100/1000/VoIP):

• Works on live networks to provide Ethernet switch detection and device configuration
• Measure network capacity (10 Meg, 100 Meg, 1 Gig) to determine support for VoIP, data and video

In today's fast-paced workplace maximizing productivity is essential. Whether installing new fiber links or troubleshooting an existing network, the faster you can locate a problem, the faster you can fix it. That's easier said than done when you are faced with a complex network of fibers, connectors and patch cords.

You can diagnose and repair simple fiber link problems with Fluke Networks' VisiFaultTM Visual Fault Locator (VFL). The laser-powered VisiFault Visual Fault Locator is a cable continuity tester that locates fibers, verifies cable continuity and polarity. This cable continuity tester helps find breaks in cables, connectors and splices. Continuous and flashing modes make for easier identification. Compatible with 2.5mm and 1.25mm connectors for easy connection. Ruggedly constructed for demanding field-testing. This visual fault locator has a long battery life for hours of use.


Fiber Verification and Fault Location:

• VisiFault emits a bright beam of red light easily visible from a distance. Connect the VisiFault to one end of a fiber then locate that fiber at the other end, even if it one of many fibers either in a cable or terminated in a rack. Perform simple end-to-end continuity checks. Verify the proper polarity and orientation of fibers within a multi-fiber connector like the MT-RJ.
• VisiFault can quickly illuminate fiber breaks, damaged connectors on patch cords, defective splices in splice trays, and tight fiber bends in and around equipment racks. The choice of a continuous wave output mode for steady fault illumination or a flashing output mode makes for easier fault location.

Easy To Use:

• The integrated universal 2.5mm adapter makes for easy connection to SC, ST, FC, and FJ connectors. The optional 1.25mm adapter allows for connection to LC and MU connectors. Attach the VisiFault to your belt using a lanyard or in the carrying case so it is always on hand when you need it. Two AA batteries gives you more than 80 hours of continuous mode battery life.

Rugged construction:

• Fluke Networks built the VisiFault to last. VisiFault incorporates an energy-absorbing holster over an impact-resistant case to withstand drops, impacts and rough treatment, ensuring years of trouble-free operation. Together with a heavy-duty tethered end cap to protect the fiber adapter, VisiFault is the VFL for demanding field applications. Unlike more fragile VFL's that utilize a flashlight body or plain plastic case, Fluke Networks industrially engineered the VisiFault custom-case to be mechanically tough. The case is compact for field-use and ergonomically designed for comfort.

In order to cater the variegated demands of our precious clients, we are offering a wide range of D814 Fluke Tool Impact .

One Permanent Link Adapter for Cat 6A and Alien Cross Talk testing. This adapter can be used for all permanent link tests Cat 6A /6/5e/5 and Cat 3.

We are successfully meeting the requirements of our clients by offering the best quality range of Fluke Jackrapid Termination Tool.

JackRapid™ is a patented jack termination tool that saves time and increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle. JackRapid allows you to terminate jacks eight times faster than traditional impact tools - with accuracy that's unmatched. 

The patented jack termination tool seats and terminates all wires simultaneously. The built-in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step.

Simple, one-handed operation, with an ergonomically designed handle, reduces hand fatigue.  With JackRapid, you’ll never punch into the palm of your hand or through drywall again.

Terminate jacks 8 times faster:

• Strip cable jacket.
• Determine wiring scheme. Dress all 4 pairs (8 wires).
• Insert jack in JackRapid front first with IDC slots facing blades of JackRapid.
• Ensure jack is completely and securely inserted in jack holder bed with IDC slots facing the blades.
• Pull trigger completely and remove excess wire prior to releasing trigger.
• Wires will be seated and cut for a solid termination.
• Release handle and remove jack from JackRapid tool. Visually verify proper termination.

Replaceable Blade Heads:

• JackRapid blade heads are specific to certain jack types--check the list below to see if JackRapid supports the jacks you use, and if not, look for a new JackRapid version in the future!

Patented jack termination tool allows you to terminate jacks 8 times faster:

• Cuts installation time - easy to use handle, seats and cuts all wires at once, saving you up to 1 minute installation time per jack!
• High quality, consistent terminations - no more compromised connections and wasted jacks
• Simple, one-handed operation with an ergonomically designed handle reduces hand fatigue
• Unique design easily accommodates close-to-wall installation
• Replaceable blade head for use with multiple jack types